Are custom cabinets more expensive than stock or semi-custom?

Yes. Stock cabinets are the cheapest (roughly $100-$300 per linear foot), semi-custom fall in the middle ($150-$650), and fully custom cabinets cost the most ($500-$1,200+ per linear foot) because they are built to exact dimensions with your choice of materials, finishes, and hardware.

What is the cheapest way to get quality cabinets?

For the best balance of cost and quality, choose a durable box material like plywood or high-grade MDF, a paint-grade or laminate finish over exotic veneers, and simple door styles like Shaker or slab. For rentals and multifamily units, spec-built cabinetry at volume rates lowers the per-unit cost significantly.

How much do commercial or apartment cabinets cost per unit?

Volume cabinetry for apartments, assisted living, and hotels is priced per unit at negotiated rates and is typically far lower per linear foot than one-off residential work because of repeatable production. Exact pricing depends on unit count, spec, and finish; request a project quote for accurate numbers.

What Do Custom Cabinets Cost in Florida? (2026 Price Guide)

Q: How much do custom kitchen cabinets cost in Florida?

In Florida, custom kitchen cabinets typically range from about $500 to $1,200+ per linear foot installed, depending on materials, finishes, and complexity. A full custom kitchen with 25-30 linear feet of cabinetry commonly falls between $15,000 and $35,000, though showpiece kitchens with premium materials can exceed that.

In Florida, custom kitchen cabinets typically cost between $500 and $1,200+ per linear foot installed. A complete custom kitchen usually lands between $15,000 and $35,000, though the real number depends on materials, door styles, hardware, and how complex your layout is. This guide breaks down what you actually pay for — so you can budget with confidence before you request a quote.

How much do cabinets cost by type?

The single biggest cost decision is stock vs. semi-custom vs. fully custom. Here is how they compare on a per-linear-foot basis (installed, general Florida market ranges for 2026):

Cabinet Type	Price / Linear Foot	Best For
Stock	$100 – $300	Tight budgets, standard layouts, fast turns
Semi-custom	$150 – $650	Some size/finish flexibility at moderate cost
Fully custom	$500 – $1,200+	Exact fit, any material, unique layouts
Commercial / multifamily (per unit)	Volume-rated	Apartments, assisted living, hotels at scale

What drives the price of custom cabinets?

Two kitchens the same size can differ by thousands. These are the factors that move the number most:

Box material: particleboard is cheapest; plywood and high-grade MDF cost more but last longer in humid Florida climates.
Finish: laminate and paint-grade are budget-friendly; stained hardwoods and specialty finishes add cost.
Door style: slab and Shaker are economical; raised-panel, inset, and custom profiles cost more labor.
Hardware: soft-close hinges, undermount slides, pull-outs, and organizers add up quickly.
Complexity: islands, tall pantry walls, floating vanities, and non-standard angles increase both material and labor.

How can I save money without cheapening the result?

You don't have to strip features to control the budget. The smartest trade-offs keep the look and durability while trimming cost:

Choose Shaker or slab doors — timeless styles that cost far less than intricate profiles.
Splurge on hardware, save on finish — soft-close everything, but a clean painted finish over a rare veneer.
Standardize where it doesn't show — custom fronts with efficient box sizing behind them.
Bundle the project — cabinets, countertops, and trim from one shop reduces coordination cost and site trips.

What about apartments, assisted living, and hotels?

Commercial and multifamily cabinetry follows a different math. Because the same units are produced repeatedly, the per-linear-foot cost drops well below one-off residential work. Pricing is quoted per unit based on the spec, finish, and total unit count — and installation is scheduled in phases to keep occupied buildings running. If you manage a property or run a build, request a project quote rather than relying on residential per-foot figures.

How long does a custom cabinet project take?

A typical custom cabinet project runs 4–8 weeks from approved design to installation, depending on scope and materials. Commercial multi-unit packages are phased to match your construction schedule.

Want a real number for your project?

These ranges are a starting point. The only way to get an accurate figure is a quick estimate on your actual space — free, itemized, and answered within one business day.

Request an Estimate

Frequently asked questions

How much do custom kitchen cabinets cost in Florida?

Typically $500–$1,200+ per linear foot installed. A full custom kitchen (25–30 linear feet) commonly runs $15,000–$35,000, with premium showpiece kitchens above that.

Are custom cabinets worth it over stock?

If you have non-standard dimensions, want specific materials, or plan to stay long-term, yes — custom eliminates wasted space and uses better hardware. For fast rental turns, stock or spec-built wins on cost.

What's the cheapest way to get quality cabinets?

Plywood or high-grade MDF boxes, a paint-grade or laminate finish, and simple Shaker or slab doors — and for multifamily, volume-rated spec cabinetry.

How much do apartment/hotel cabinets cost per unit?

Volume-rated and typically far lower per foot than residential work thanks to repeatable production. Request a project quote for accurate per-unit numbers.

What Do Custom Cabinets Cost in Florida?